The installation of the mdf ovolo skirting board is a great method for adding tastefulness and appeal to your home’s interior. These decorative components give a complete look as well as fill the useful need of concealing unattractive gaps between walls and floors.
Gather the Necessary Tools and Materials
Before you start the installation, it’s vital to gather every one of the tools and materials you’ll require. Here is a rundown of the ordinarily utilized things:
- MDF Ovolo skirting boards
- Estimating tape
- Miter saw or adapting saw
- Adhesive or nails
- Caulk
- Paint or preliminary
- Sandpaper
- Level
- Pencil
- Wellbeing hardware
Having all that on hand will make the installation cycle smoother and more proficient.
Measure and Cut the Skirting Boards
Begin by estimating the length of each wall where you intend to install the mdf ovolo skirting board. Guarantee the measurements are accurate and move them onto the skirting boards. Utilize a miter saw or adapting saw to cut the boards at a 45-degree plot for corners and a 90-degree plot for straight segments.
Prepare the Walls and Skirting Boards
Before attaching the skirting boards, prepare the walls and boards for installation. On the off chance that the walls have any blemishes, for example, knocks or breaks, use sandpaper to smoothen them out. Wipe away any residue or trash.
Adhere or Nail the Skirting Boards
There are two normal methods for attaching skirting boards: utilizing adhesive or nails. Pick the method that suits your inclinations and follow the means beneath:
Adhesive Method
- Apply a reasonable adhesive to the rear of the skirting board.
- Position the board against the wall, adjusting it to the noticeable measurements.
- Press immovably to guarantee appropriate grip.
- Utilize a level to check for straightness.
- Repeat the interaction for each part of the skirting board.
- Permit the adhesive to dry according to the producer’s directions.
Nailing Method
- Place the skirting board against the wall, adjusting it to the noticeable measurements.
- Utilize a pencil to stamp the place of the board on the wall.
- Pre-drill openings are somewhat more modest than the nails to forestall parting.
- Attach the skirting board to the wall utilizing nails and a sled or nail weapon.
- Guarantee the board is level and secure.
- Repeat the interaction for each part of the skirting board.
Fill Gaps and Caulk
After attaching the skirting boards, there might be little gaps between the boards and the wall or between the boards themselves. To accomplish a consistent completion, use caulk to fill these gaps. Apply the caulk with a caulk weapon and smooth it with a caulk-completing tool or a wet finger.